RC Tool Setup for Under $100
I obtain lots of questions like, "What's the most effective Hex Wrench for $5" or "What's better, MIP or Integy?." After around 40 episodes of Tool Tuesday under my belt, I have actually decided to compile a complete checklist for you, the "Best RC Tool configuration for under $100." Currently this is a set of tools that I have actually found to be extremely versatile, resilient and also end up saving you a lots of cash in the long run. I will certainly reveal you the most effective value for a 1/10th -1/ 8th scale RC car.
Hex Wrenches.
The lengthy discussed problem of finest hex wrench for the cash has been addressed by MIP! It's as easy as that. Top quality over cost on this one, as the hex wrench collection is most likely one of the most pre-owned product in an RC enthusiast's collection. Available as single units, metric, and also common sets, the MIP Hex wrenches ($ 28.74) are comfortable in the hand as well as last a life time.
Nut Driver.
The AKA Double Drive Nutdriver ($ 21.93) has actually made its method into my device bag as well as is my daily-use nut motorist. With one take care of, it permits both 5.5 mm and 7.0 mm with a spin of the handle for those common 1/10th range wheel nuts. I constantly like it when I have a high quality tool that does 2 points!
Work Stand.
The Duratrax Pit Tech Deluxe work stand ($ 11.99) enables you to work on practically any sized car (alright, 5th scales excluded!). It collapses down for easy storage space and has a helpful catch all equipment bin built in.
Turnbuckle Wrench.
The Schelle auto racing Innovations Turnbuckle wrench ($ 18.82) adds high quality to the one-of-a-kind styling. With the capacity to readjust nearly every sized turnbuckle on the market from Team Associated, JConcepts, Lunsford as well as Losi and the added 12mm Team Associated shock tool gives it that " 2 in one check", again!
Lexan Scissors/ Body Reamer.
The Dubro combo set ($ 13.08) isn't the most effective looking/quality set but it gets the job done. The scissors enable curved cutting of most lexan bodies, and also the reamer obtains those best body openings every time.
Sum everything Up.
Fifty percent of the Remote Control experience is working on your automobile and also learning all of the inner workings of what "makes it go." Quality devices make that experience pleasurable and stress complimentary, which is why we call this thing a "hobby." Right here's the breakdown:.
1. MIP Hex wrenches ($ 28.74).
2. Also Known As Double Drive Nutdriver ($ 21.93).
3. Duratrax Pit Tech Deluxe job stand ($ 11.99).
4. Schelle competing Innovations Turnbuckle wrench ($ 18.82).
5. Dubro combination kit ($ 13.08).
The above make up about $94.56 as well as is not every little thing you'll ever need, however it will get you via 90% of RC wrenching. So, did your selection of devices make my checklist?
Hex Wrenches.
The lengthy discussed problem of finest hex wrench for the cash has been addressed by MIP! It's as easy as that. Top quality over cost on this one, as the hex wrench collection is most likely one of the most pre-owned product in an RC enthusiast's collection. Available as single units, metric, and also common sets, the MIP Hex wrenches ($ 28.74) are comfortable in the hand as well as last a life time.
Nut Driver.
The AKA Double Drive Nutdriver ($ 21.93) has actually made its method into my device bag as well as is my daily-use nut motorist. With one take care of, it permits both 5.5 mm and 7.0 mm with a spin of the handle for those common 1/10th range wheel nuts. I constantly like it when I have a high quality tool that does 2 points!
Work Stand.
The Duratrax Pit Tech Deluxe work stand ($ 11.99) enables you to work on practically any sized car (alright, 5th scales excluded!). It collapses down for easy storage space and has a helpful catch all equipment bin built in.
Turnbuckle Wrench.
The Schelle auto racing Innovations Turnbuckle wrench ($ 18.82) adds high quality to the one-of-a-kind styling. With the capacity to readjust nearly every sized turnbuckle on the market from Team Associated, JConcepts, Lunsford as well as Losi and the added 12mm Team Associated shock tool gives it that " 2 in one check", again!
Lexan Scissors/ Body Reamer.
The Dubro combo set ($ 13.08) isn't the most effective looking/quality set but it gets the job done. The scissors enable curved cutting of most lexan bodies, and also the reamer obtains those best body openings every time.
Sum everything Up.
Fifty percent of the Remote Control experience is working on your automobile and also learning all of the inner workings of what "makes it go." Quality devices make that experience pleasurable and stress complimentary, which is why we call this thing a "hobby." Right here's the breakdown:.
1. MIP Hex wrenches ($ 28.74).
2. Also Known As Double Drive Nutdriver ($ 21.93).
3. Duratrax Pit Tech Deluxe job stand ($ 11.99).
4. Schelle competing Innovations Turnbuckle wrench ($ 18.82).
5. Dubro combination kit ($ 13.08).
The above make up about $94.56 as well as is not every little thing you'll ever need, however it will get you via 90% of RC wrenching. So, did your selection of devices make my checklist?
